web counter

EN

    Sapphire nozzle 280-M12

    Sapphire nozzle 280-M12

    The sapphire nozzle type 280-M12 contains three parts and is designed for surface treatment. The nozzle is characterized above all by its long service life, efficiency and quality. This nozzle was designed for customer-specific applications up to an operating pressure of 3000 bar. The gasket and mounting screw are available separately for this nozzle.

    The heart of the nozzle, its the sapphire that is completely manufactured by mvt AG, thus ensuring a consistent and high quality. All sapphire are checked for scratches, cracks and flow.

    This product is compatible with the following brands or products:

    • Type F
    • Form 10
    Sapphire nozzle 280-M12

    Properties and advantages

    • Long lifetime
    • Constant jet quality
    • High-power and focused water jet
    • Needle jet with high energy density
    • Easy to install and disassemble
    • Swiss Quality

    Applications

    • Automobile and aircraft industry
    • Construction industry
    • Mining
    • Chemical industry
    • Iron, steel and metal industries
    • Energy industry
    • Beverage industry
    • Glass, porcelain and ceramic industries.
    • Lumber industry
    • Municipal operations
    • Agriculture
    • Mechanical and apparatus engineering
    • Food industry
    ART. NO. (1)
    31040._ _

    Specifications

    • Operating pressure (bar) max. 3000
    • Operating temp. (°C) max. 150
    • Tightening torque (Nm) max. 25
    Sapphire nozzle 280-M12

    Downloads

    Datasheet
    Send request
    ART. NO.NOZZLE SIZE in US Gal/min at 40 psiNOZZLE Ød mm PRESSURE in psi / bar
    psi
    2900     		psi
    7250     		psi
    10875     		psi
    14500     		psi
    21750     		psi
    29000     		psi
    36250     		psi
    43500
    bar
    200     		bar
    500     		bar
    750     		bar
    1000     		bar
    1500     		bar
    2000     		bar
    2500     		bar
    3000
    FLOW RATE in l/min
    31040.010000020.10 0.064 0.100 0.122 0.141 0.171 0.196 0.217 0.237
    31040.012500030.125 0.100 0.157 0.191 0.220 0.267 0.306 0.340 0.370
    31040.015000040.15 0.143 0.226 0.275 0.316 0.385 0.441 0.489 0.532
    31040.017500060.175 0.195 0.307 0.375 0.431 0.523 0.600 0.666 0.725
    31040.020000080.20 0.255 0.401 0.489 0.563 0.684 0.784 0.870 0.946
    31040.025000120.25 0.399 0.627 0.764 0.879 1.068 1.224 1.359 1.479
    31040.030000180.30 0.574 0.903 1.101 1.266 1.538 1.763 1.957 2.130
    31040.035000240.35 0.781 1.229 1.498 1.723 2.094 2.400 2.664 2.899
    31040.040000310.40 1.020 1.605 1.957 2.251 2.735 3.134 3.479 3.786
    31040.045000400.45 1.291 2.031 2.477 2.848 3.461 3.967 4.403 4.792
    31040.050000490.50 1.594 2.507 3.058 3.517 4.273 4.897 5.436 5.916
    31040.055000590.55 1.929 3.034 3.700 4.255 5.170 5.925 6.578 7.158
    31040.060000710.60 2.296 3.611 4.404 5.064 6.153 7.052 7.828 8.518
    31040.065000830.65 2.694 4.238 5.168 5.943 7.221 8.276 9.188 9.997
    31040.070000960.70 3.125 4.915 5.994 6.892 8.375 9.598 10.655 11.595
    31040.075001100.75 3.587 5.642 6.880 7.912 9.614 11.018 12.232 13.310
    31040.080001250.80 4.081 6.419 7.828 9.002 10.939 12.536 13.917 15.144
    31040.085001420.85 4.607 7.247 8.838 10.163 12.349 14.152 15.711 17.096
    31040.090001590.90 5.165 8.124 9.908 11.394 13.844 15.866 17.614 19.166
    31040.095001770.95 5.755 9.052 11.039 12.695 15.425 17.678 19.625 21.355
    31040.100001961.00 6.377 10.030 12.232 14.066 17.091 19.588 21.746 23.662
    *Click the proper L/MIN to send a direct request.

    Instructions

    When manually operating high pressure guns and lances the repulsive force on the axis should not exceed 250N! If the repulsive force exceeds 150N, a support / body armour is required!

    < 150 N
    < 250 N
    > 250 N

    Seal and mounting screw available separately

    POS.ART. NO.ARTICLEDIMENSION
    110052SealD=9x6.8
    310067Mounting screwM12-6g
    Back